Ningbo Canyu Opto Electrical Trade Co., Ltd.
Main products:LED Head Lamp,LED Bulb,LED Work Light,LED Torch,LED Spot Light
Products
Contact Us
  • Contact Person : Mr. WANG CANDONG
  • Company Name : Ningbo Canyu Opto Electrical Trade Co., Ltd.
  • Tel : 0086-574-87616620-8006
  • Fax : 86-574-87616619
  • Address : Zhejiang,NINGBO,NO.301 GUANG MING XIN CUN ,ZHUANG SHI ,ZHEN HAI AREA
  • Country/Region : China
  • Zip : 315201

Handcrank dynamo lantern

Handcrank dynamo lantern
Product Detailed
Dynamo led camping lantern

 MAIN PARAMETERS

 

ITEM                                                  

PARAMETERUNIT  
Working time after being  charged for 1 minute    
Radio time13 Minute  
Warning time4 Minute  
6 LEDs lighting in power saving mode20 Minute  
6 LEDs lighting in normal mode10 Minute  
6 LEDs flashing60 Minute  
Working time after being charged fully    
Radio time 5 Hour  
Warning time Hour  
6 LEDs lighting in power saving mode 3.5 Hour  
 6 LEDs lighting in normal mode 2 Hour  
6 LEDs flashing 20 Hour  
 3 minutes cranking can make mobilephone talk for 2-8 minutes    

 

PRODUCT FEATURES

1.It adopts 3 phase brushless generator to crank for power,low noise with high efficiency.

2.Ultra bright illumination.

3.High sensitive FM radio function,loudspeaker and earphone output,the volume can be adjusted

4.Two ways to change the inside 300mAh/3.6V Ni-MH chargeable battery.

5.USB tie-in for power output.

6.Controlled by electric switch,long life-span.

7.Convenient to use,no external batteries needed,just cranking can charge it.

8.Novel,fashionable and exquisite.

9.Complete functions.

USING METHOD

Charge for MP3,MP4 or mobilephone:

Open the socket cover,push down the charging mode switch,then insert one end of  the charging cable into the mobilephone,MP3 or MP4,and the other end into the USB socket of  the product;Crank the handle at the speed of 3 circles per second,when the mobilephone,MP3 or MP4 give indications,it means charging.

Lighting:

1.Crank the handle at the speed of 3 circles per second for about 1 minute,press the switch,the light will be on.

2.The switch model:press for the first time,6LEDs light(power saving mode);press again,6LEDs light(normal mode);press once more,6LEDs are off and 6 red LEDs flash;press for the last time,6 red LEDss are off.

Warning:

Push the switch uppermost to make this function work.

Radio:

1.Turn the volume switch clockwise,when you hear a "crack"sound,it means the radio is working.

2.Lock the RESET button to the lowest frequency first,then press the SCAN button to search stations automatically.The radio will lock the sastion automaticallyand then stop searching if there is any station exist.If you want to go on,just press the SCAN button is OK.If you haven't searched any station after pressing for several times,then you can press the RESET button to search again.

3.Volume adjusting:

Turn the volume switch clockwise to amplify the volume,Contrariwise,the volume will be decreased.

4.Earphone and speaker:

Open the cover of the socket,insert the earphone into its corresponding jack to make it work,pull it out,the speaker will work again.

5.Turn off the radio:

Turn the volume knob anticlockwise to the end,when you hear a "crack"sound,it means the radio is out of work.

 

 

 

 

 

Handcrank dynamo lantern



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.